Question 1

What is an FD30 fire door?

Accepted Answer

An FD30 door is engineered to provide at least 30 minutes of fire resistance when installed as part of a fully certified fire door assembly (including fire-rated frame, intumescent seals, hinges, and self-closing hardware).

Question 2

What is the difference between FD30 and FD60?

Accepted Answer

FD30 doors provide 30 minutes of fire integrity and are commonly installed in residential flats, offices, and care homes. FD60 doors provide 60 minutes of protection and are typically required in high-risk zones, commercial stairwells, boiler rooms, electrical risers, and tall buildings.

Question 3

How often should fire doors be inspected?

Accepted Answer

Under the Fire Safety (England) Regulations 2022, responsible persons in multi-occupied residential buildings over 11m must inspect flat entrance doors annually and communal fire doors quarterly. Commercial premises should conduct formal inspections at least bi-annually or every 6 months.

Question 4

Can an existing fire door be repaired rather than replaced?

Accepted Answer

Yes! In many cases, excessive gaps, misaligned latches, worn intumescent seals, or damaged door closers can be repaired using certified remedial techniques. This can save up to 60% compared to purchasing and fitting new complete doorsets.

Question 5

Do you provide detailed compliance inspection reports?

Accepted Answer

Yes. Following every inspection or survey, Projectfiredoors Ltd provides a detailed digital report complete with photographs, defect classifications, gap measurements, and a clear remedial action plan supporting your Fire Risk Assessment (FRA).

Question 6

How long does a fire door installation take?

Accepted Answer

Installing a complete fire doorset—including frame fitting, fire-stopping perimeter insulation, architraves, ironmongery, and closer calibration—typically takes up to 8 hours per door depending on site conditions and existing opening masonry.

Question 7

Do you offer warranties on your work?

Accepted Answer

Yes. All Projectfiredoors Ltd installations and remedial works include our 6-Month Workmanship Warranty. Additionally, supplied materials carry full manufacturer guarantees.

Question 8

Can I upload my existing Fire Risk Assessment (FRA) for a quick quote?

Accepted Answer

Absolutely! You can use our dedicated 'Upload Your FRA' tool on our website to upload PDFs, door schedules, or photographs. Director Jake Palmer and our technical team will review your documents and provide a clear quotation.

Fire Door Compliance FAQs

Have a Specific Question About Your Building?